Determining the exact cause of a
component failure is the first step towards defining corrective action. ipolytech have
extensive experience in polymer failure analysis of products
manufactured from all major thermoplastic materials over all end user sectors.
The majority of plastic component failures occur in the mid to long
term. Even in normally tough, ductile plastic materials failures are invariable brittle in nature and result in a short service life. Such brittle failures are most commonly caused by:
the use of an incorrect material for an application is a common cause of polymer failure, lack of understanding of the interaction of polymers with chemicals and environments and long term response commonly leads to premature failure.
interaction of polymers with chemicals and environments can lead to degradation of racking of polymers. For many materials specific interactions with common household products can lead to rapid crazing, cracking, fracture and product failure.
long term loads
plastic and rubber products are sensitive to long term loads. These can be either static loads through creep or fatigue mechanisms. These processes mean that the strength and stiffness of plastic components in service conditions are frequently significantly lower than quoted on a standard data sheet. A lack of understanding of the significance of the long term mechanical effects is a common cause of failure
incorrect processing of plastic materials causes failure through degradation and embrittlement process, high residual stresses, material inhomogeneity, introduction of product faults, moulding defects or contaminants
product design is fundamental to ensuring plastic component long term durability. incorrect design will highlight polymeric material weaknesses to long term loads, chemical environments, high speed loading, fatigue loads resulting in brittle failure of the product within a short service life.
An understanding of why a plastic product has failed requires detailed knowledge
of the long term performance of polymers together with a thorough understanding of their interaction with specific service
environments (chemical, temperature, stress and time).
Supported by our chemcial analysis and mechanical testing laboratories
we are able to rapidly assess the cause of product failures and, importantly,
recommend remedial action to minimise the risk of further failure. To discuss a specific plastic failure diagnosis please follow our ENQUIRY link..